1″Bsp Female 8 Back & 3 forward Sewer & Drain Jetter Nozzle

1"  8 Back Streamline Jet

Features

 

  • Designed to be as compact and small as possible
  • See What our customers say here Reviews
  • Get around the tightest bends with ease.
  • 8 rear jets and 3  forward jets to burst trough tough blockages.
  • Excellent Forward propulsion
  • No shoulders to get snagged on edges of pipes.
  • Made from high quality 304 grade stainless steel
  • These nozzles are made and sold by Abtech and are not available any where else

 

If the flow rate or pressure you require is not listed feel free to contact me I will be glad to help.

We have lots of nozzles in stock ready for dispatch.

This is a 1”BSP tread fitting and is suited to industrial sewer cleaning machines with a 1” hose.

Please ensure that the listed product will fit your machine – as it is the bidder/customer’s responsibility to ensure that it will fit.

If you have any questions please mail me at aidan@abtechnozzles.ie

65.00 (Excl. VAT)
Weight: 580g
Flow Rate Per Min * Please Choose Your Requested Flow Rate
Pressure * Please Select Your Pressure
Hose Length * Select Your Hose Length
How many ?

Category 1"Bsp Nozzles

1/2″Bsp Female 6 Back & 3 Forward Sewer & Drain Jetter Nozzle

Features

 

  • See What our customers say here Reviews
  • Designed to be as compact and small as possible
  • Get around the tightest bends with ease.
  • 6 rear jets and 3 powerfull forward jets to burst the toughest blockages.
  • Wxcellent Forward propulsion.
  • No shoulders to get snagged on edges of pipes.
  • Made from high quality 304 grade stainless steel.
  • These nozzles are made and sold by Abtech and are not available anywhere else.

This is a ½”bsp tread fitting and is suited to industrial sewer cleaning machines with a ½” hose.

Please ensure that the listed product will fit your machine – as it is the customer’s responsibility to ensure that it will fit.

If the pressure and flow rate you require is not listed you can contact me at the email below.

 

If you have any questions please mail me at aidan@abtechnozzles.ie

 

46.50 (Excl. VAT)
Weight: 65g
Flow Rate Per Min * Please Choose Your Requested Flow Rate
Pressure * Please Select Your Pressure
Hose Length * Select Your Hose Length
How many ?

Category 1/2" Bsp Nozzles

1/2″Bsp Female 10 Back Sewer & Drain Jetter Nozzle

Features

 

  • See What our customers say here Reviews
  • Designed to be as compact and small as possible
  • Get around the tightest bends with ease.
  • 10 rear jets with forward jet gives excellent all round cleaning.
  • Excellent Forward propulsion.
  • No shoulders to get snagged on edges of pipes.
  • Made from high quality 304 grade stainless steel.
  • These nozzles are made and sold by Abtech and are not available anywhere else.

This is a ½”bsp tread fitting and is suited to industrial sewer cleaning machines with a ½” hose.

Please ensure that the listed product will fit your machine – as it is the customer’s responsibility to ensure that it will fit.

If the pressure and flow rate you require is not listed you can contact me at the email below.

 

If you have any questions please mail me at aidan@abtechnozzles.ie

 

47.00 (Excl. VAT)
Weight: 65g
Flow Rate Per Min * Please Choose Your Requested Flow Rate
Pressure * Please Select Your Pressure
Hose Length * Select Your Hose Length
How many ?

Category 1/2" Bsp Nozzles

1″1/4 Drain Jetter Power Nozzle 8/12 Split

    • One year no quibble guarantee on this Nozzle.
    • See What our customers say here Reviews
    • Detailed machining inside the nozzle to give efficiency of up to 95%
    • Fourteen powerful rear jets.
    • Seven jets set at 8º and seven jets set at 12º no forward jet.
    • 12KG weight ensures nozzle stays on the floor of the Pipe.
    • Excellent for cleaning and descaling large pipes.
    • Suitable for pipes from 12 inch (300mm) to 48 inch (1200mm).
    • Replaceable Carbide inserts for longer life.
    • Made form stainless steel.
    • Click here for video Bomb Jet Manufacturing video

Our bomb nozzles are precision machined in our factory on a nine axis mill turn center in one operation. This process insures that every nozzle we manufacture is within our tight tolerances, giving you the superior performance you need.

20140225_134832522_iOS

 

It’s what’s inside that counts the photo above shows the detail inside our nozzle to give the high power expected from a good nozzle. These nozzles are now available at a special introductory offer including carbide inserts while stocks last.

 

 

 

600.00 (Excl. VAT)
Weight: 5g

Out of Stock

Category 1"1/4 Bsp Nozzles

EU VAT regulations

EU VAT regulations

We notice that most of our clients from EU countries do not use their Vat number when ordering drain jetter nozzles from both our on-line store and over the telephone. If you are the holder of a valid EU VAT number, you do not need to pay Vat on nozzles from other EU countries. Here is a useful link explaining how this works. http://europa.eu/youreurope/business/vat-customs/cross-border/index_en.htm

1/4″ Bsp Nozzles

Our 1/4  Jetter nozzles are ideal for those difficult to reach areas measuring only 18mm at the widest point.

These nozzles will blast into blockages in smaller diameter pipes and drains using less water than larger jets. Available in three or four back configuration and with or without a front jet depending on your needs and operating on as low as 10 l/min no job is to small any more. Three back version is ideal for lower flow rate machines while still giving good traction and cutting if you need extra pulling power then choose one without a front jet this way all the force is pushing the nozzle forward. The four back will give better cleaning and leave less streaks on the pipe wall, but needs a higher flow rate, if used without a front jet to give that little bit extra pulling power.

IMG_1670

Our New 10 Back 3/4″ Bsp Drain Cleaning nozzle

One of the newest additions to our nozzle range the 3/4″  Ten back streamline nozzle offers exceptional cleaning around the circumference of the pipe to be cleaned.

These nozzles have ten powerful rear jets with no front jet uses all of the power to clean the wall of pipe and give maximum pulling power

This nozzle is a streamline drilled nozzle and is sized exactly to suit your machines pressure and flow rate in order to give the most from your machine.

These nozzles offer good cost vs efficiency rates offering low-cost cleaning of smaller pipes up to 12″ or 300mm

If heavier cleaning needs to be carried out then our Power Nozzles give up to 95% efficiency and longer life due to the use off replaceable carbide inserts.

With detailed machining inside the nozzle to give more power, combined with the extra weight to keep the nozzle on the floor of the pipe gives unbelievable pulling power and cleaning results.

IMG_1323

 

National Ploughing Championships

IMG_1335IMG_1355We will be exhibiting all our nozzles at the National Ploughing Championships from 23rd to 25th of September feel free to visit our stand no.215

IMG_1335

 

 

1/2″ Power Nozzle Offer

Get a free ½” streamline jetter nozzle when you order one of our ½” power nozzles at the special price off €180.00 +vat

This is a limited offer while stocks last

  • One year no quibble guarantee on this Nozzle.
  • Free ½” 6 back streamline nozzle while stock lasts.
  • Detailed machining inside the nozzle to give efficiency of up to 95%
  • Six rear jets.
  • Three jets at 10º and three jets at 14º no forward jet.
  • 3KG weight ensures nozzle stays on the floor of the Pipe.
  • Excellent for silt, sand, debris removal and long runs in large pipes.
  • Suitable for pipes from 4 inch (100mm) to 24 inch (600mm).
  • Replaceable Carbide inserts for longer life.
  • Made form stainless steel.
  • Click here for video Bomb Jet Manufacturing video
  • Video of Nozzle in action

Our bomb nozzles are precision machined in our factory on a nine axis mill turn centre in one operation.

This process insures that every nozzle we manufacture is within our tight tolerances, giving you the superior performance you need.

 

 

 

High Presure Drain Jetter Nozzle

This video gives a good impression of the kind of power generated by  ABTECH POWER NOZZLES

NOZZLES should always be used by trained professionals one of these NOZZLES getting out of control can result in serious injury or even death.  DRAIN JETTER NOZZLES can reach very high-speed if they manage to escape from the pipe being unblocked it can fly around out of control in any direction. Jet shown is only running at 85 Ltr/min and 140 Bar or 19 UK Gallon at 2000 Psi this is at the bottom end of the flow required for 3/4″ hose. ABTECH HIGH EFFICIENCY NOZZLES have been precision machined inside to give up to 95% efficiency this means that all the energy at the end of the hose is used to propel the nozzle forward and on extraction pulling out the debrise in dthe pipe

 

By Aidan Mullane

Shopping Cart

  • Total Items: 0
  • Total Units: 0
  • Total: 0.00