We notice that most of our clients from EU countries do not use their Vat number when ordering drain jetter nozzles from both our on-line store and over the telephone. If you are the holder of a valid EU VAT number, you do not need to pay Vat on nozzles from other EU countries. Here is a useful link explaining how this works. http://europa.eu/youreurope/business/vat-customs/cross-border/index_en.htm

1"  8 Back Streamline Jet Features   Designed to be as compact and small as possible Get around the tightes...

Features   Optional Front Jet Designed to be as compact and small as possible Get around the tightest bends w...

Features   Optional Front Jet Designed to be as compact and small as possible Get around the tightest bends w...

One year no quibble guarantee on this Nozzle. Detailed machining inside the nozzle to give efficiency of up to 95% F...

These nozzles will blast into blockages in smaller diameter pipes and drains using less water than larger jets. Available in three or four back configuration and with or without a front jet depending on your needs and operating on as low as 10 l/min no job is to small any more. Three back version is ideal for lower flow rate machines while still giving good traction and cutting if you need extra pulling power then choose one without a front jet this way all the force is pushing the nozzle forward. The four back will give better cleaning and leave less streaks on the pipe wall, but needs a higher flow rate, if used without a front jet to give that little bit extra pulling power.

These nozzles have ten powerful rear jets with no front jet uses all of the power to clean the wall of pipe and give maximum pulling power

This nozzle is a streamline drilled nozzle and is sized exactly to suit your machines pressure and flow rate in order to give the most from your machine.

These nozzles offer good cost vs efficiency rates offering low-cost cleaning of smaller pipes up to 12″ or 300mm

If heavier cleaning needs to be carried out then our Power Nozzles give up to 95% efficiency and longer life due to the use off replaceable carbide inserts.

With detailed machining inside the nozzle to give more power, combined with the extra weight to keep the nozzle on the floor of the pipe gives unbelievable pulling power and cleaning results.

This is a limited offer while stocks last

• One year no quibble guarantee on this Nozzle.
• Free ½” 6 back streamline nozzle while stock lasts.
• Detailed machining inside the nozzle to give efficiency of up to 95%
• Six rear jets.
• Three jets at 10º and three jets at 14º no forward jet.
• 3KG weight ensures nozzle stays on the floor of the Pipe.
• Excellent for silt, sand, debris removal and long runs in large pipes.
• Suitable for pipes from 4 inch (100mm) to 24 inch (600mm).
• Replaceable Carbide inserts for longer life.
• Made form stainless steel.
• Click here for video Bomb Jet Manufacturing video
• Video of Nozzle in action

Our bomb nozzles are precision machined in our factory on a nine axis mill turn centre in one operation.

This process insures that every nozzle we manufacture is within our tight tolerances, giving you the superior performance you need.

NOZZLES should always be used by trained professionals one of these NOZZLES getting out of control can result in serious injury or even death.  DRAIN JETTER NOZZLES can reach very high-speed if they manage to escape from the pipe being unblocked it can fly around out of control in any direction. Jet shown is only running at 85 Ltr/min and 140 Bar or 19 UK Gallon at 2000 Psi this is at the bottom end of the flow required for 3/4″ hose. ABTECH HIGH EFFICIENCY NOZZLES have been precision machined inside to give up to 95% efficiency this means that all the energy at the end of the hose is used to propel the nozzle forward and on extraction pulling out the debrise in dthe pipe

By Aidan Mullane